Pressure Pipe Systems

PLASSON COMPRESSION FITTINGS, SADDLES & VALVES

 

Pipe Conversion Chart

The basic fitting is a dedicated product for joining metric MDPE pipe. It will securely join the pipe without any additional components. However, for the purpose of WRAS approval, a plastic liner is used which is pushed into the pipe. The fitting can be regarded as “Push Fit” as it is possible to simply loosen the nut, push it together and tighten. The fittings can be easily adapted for use with other pipe materials simply by adding an adaptor. In addition, there
are also dedicated imperial to metric fittings. Plasson offers a full range of adaptors to provide exceptional adaptability.

Compression Fittings

These fittings are made for joining polyethylene pipes and are designed
according to ISO standards. The fittings are suitable for working pressure up to 16 bar. The fittings are used in agriculture, industry, urban water installations, mines etc. The fittings are available in sizes 16mm-160mm.

Valves

These Plasson rigid valves made of polypropylene are suitable for installation in any system where reliable corrosion-free valves are required. The angle seat valves have very low pressure loss. The valves (and check valves) are especially designed for systems where one or both sides of the valve are connected to plastic pipes. The valves are available in sizes 1/2"-2".

Threaded Fittings

Plasson threaded fittings are made of high grade block polypropylene copolymer. They are especially suitable for use in systems where continuation of use of polypropylene is important. The variety of fittings are available in sizes from fi"-2" in most products and up to 4" in some products.

Saddles

Plasson saddles are suitable for use with pipes made of a wide variety of materials (HDPE, LDPE, PP, PVC, ABS and others). The saddles are available in sizes 20mm-180mm. The threaded female offtake conforms to ISO 7, DIN 2999, BS 21, NEN 3258, etc., and is available in sizes fi" to 2".
  
<< Back to Pressure Pipe Systems Menu