You are here: Home > Products > Civils & Drainage Materials > Centurion Access Systems

Email This Page | Print Page |

Centurion Access Systems

Access Chambers

The chambers are designed to comply with the highways installation directive for a 450mm minimum clearance cover between the surface and ducting for applications in the footways and 750mm for other carriageway applications. The chambers are manufactured by rotational moulding and contain a high percentage of recycled material making the product more environmentally friendly than alternative systems.

Anti-Slip Composite covers

The usual benefits of rust proof and maintenance free cover are now enhanced with an improved skid resistance surface and the cover is supplied complete with a standard lock facility to prevent unauthorised chamber entry.

Galvanised Frames

Galvanised steel frames act as formers for the chamber, maintaining the clear opening size specified. The frames provide height and tilt adjustment at surface level. For added security, Civils & Lintels supply the universal frame locked as standard. For installations in areas of block or tactile paving, frames are available with a recessed inner tray and a lowered edge that can be paved up to, avoiding cuts. A dropped frame is also available for use with a Centurion composite cover in paved areas.

Centurion Plus Chamber System

A freestanding, stackable chamber system complete with an integral cover, 150mm deep sections, removing the need for a costly, traditional steel or ductile iron frame.

Features:

• No need for traditional galvanised or ductile frame support
• No need for concrete thus eliminating cost and time during installation
• Rebated chamber design enables B125 cover to fit flush with chamber
• Decorative concrete, block paviors, slabs etc can be laid directly alongside the chamber creating a polished, surface level finish
• Complete system manufactured from mixture of thermoset moulding compounds
• Central removable beam where necessary

Access Chamber System

The market leader in Access Systems for Street Lighting, Traffic Signals and the Communications industry, the Centurion Access System was successfully developed for acceptance by the water, rail and CCTV sectors.

Civils and Lintels, together with RDT Chamber Solutions, have developed a groundbreaking, freestanding, stackable chamber system complete with an integral cover, 150mm deep sections, removing the need for a costly, traditional steel or ductile iron frame.

Features:

• No need for traditional galvanised or ductile frame support
• No need for concrete thus eliminating cost and time during installation
• Rebated chamber design enables B125 cover to fit flush with chamber
• Decorative concrete, block paviors, slabs etc can be laid directly alongside the chamber creating a polished, surface level finish
• Complete system manufactured from mixture of thermoset moulding compounds
• Central removable beam where necessary

Benefits:

• Complies with health & safety requirements - ‘one or two man lift’
• Much stronger than typical thermoplastive alternatives
• Resistant against aggressive soil conditions
• Performs against diverse temperature changes -40oC to +140oC, will not soften by heat or brittle by frost
• Duct entries are knock-outs - no need for drilling
• Supplied flat-pack for transport cost savings or fully assembled if required
• Composite covers have anti-slip design and are supplied locking as standard
• Telemetry reading can be made directly through the composite cover

Applications:

• Street Lighting
• Traffic Signals
• CCTV
• Telecoms
• Water
• Gas

Sizes available

290 x 275 x 150mm
450 x 300 x 150mm
450 x 450 x 150mm
600 x 450 x 150mm
600 x 600 x 150mm
900 x 450 x 150mm
900 x 600 x 150mm
1200 x 450 x 150mm
1200 x 600 x 150mm