Xtratherm Thin-R/CW(T&G) is the best solution when designers/regulations demand additional thermal insulation in external masonry walls. Xtratherm Thin-R boards achieve high standards of insulation whilst maintaining a residual cavity to prevent moisture penetration, without a substantial increase in the width of the cavity and of the overall wall thickness
Xtratherm XT/CW is manufactured under quality systems approved under EN ISO 9001: 2000 and it’s use is covered by BBA Certificate 07/4407.
Xtratherm Thin-R Boards can be readily cut using a sharp knife or fine toothed saw.
When running electric cables within insulation, advice given in the BRE publication “ Thermal insulation: avoiding risks” and BS 7671: 2001 should be followed.
Xtratherm Thin-R is stable, rot proof and durable. It will remain an effective insulant for the life of the building.
All Xtratherm products are safe to use and chemically inert. A Health & Safety information sheet is available from the Xtratherm Technical Support Department
Robust tongued and grooved jointing Clear cavity maintained No exposure restrictions Low emissivity foil facings
Effective insulation of roof area Reduced insulation thickness Reduces thermal bridging Minimizes intrusion into living area
Robust tongue & groove jointing Clear cavity maintained Corner & reveal panels Low emissivity foil facings
Effective insulation of roof area Width Variable Reduced fitting time. Minimizes intrusion into living area
High thermal performance Drylining & insulation in one fix Shorter drying time Responsive insulation system
Insulation & decking in one fix For new & refurbishment roofs
Extra thermal performance Suitable for under floor heating Reduced insulation thickness High compressive strength
|25,30,35,40 (Square Edge)|