SPECIALIST CHEMICALS AND REPAIR MIXTURES

Tarmac Ultibed 60 Mortar – Ultibed 60 is a rapid strength bedding mortar for use with all access covers, as well as for the rapid bonding of granite setts and flags, emergency repairs and bedding of kerbs. This mortar conforms to HD27/15. The mortar, due to its rapid strength gain, can be opened to traffic in as little as 1 hour.

Tarmac Ultibed Concrete – is a specially formulated single part concrete for back fill around manhole frames and gullies which can also be used for surface repairs. Due to its rapid setting properties this product can be suitable for traffic loading after just 90 minutes.

Tarmac Ultibed Kerb Repair – This Kerb Repair Mortar is a rapid hardening mortar for repairing damaged kerb stones. It is a fast setting permanent repair product. The 2 part polymer modified system gives a workable concrete grey compound which sets in 20 minutes, it can also be part mixed and layered in thicknesses of up to 30mm. This repair mortar needs no specialist skills or tools and only needs the powder and liquid (supplied) to become permanent making it easy to mix and install.

Adawall Kerb Repair from 2HK – This Kerb Repair Mortar is a rapid hardening mortar for repairing damaged kerb stones. It is a fast setting permanent repair product, which, when water is added, gives a workable concrete grey compound which sets in 20 minutes, it can also be part mixed and in thicknesses of up to 30mm. This repair mortar needs no specialist skills or tools and only needs water to become permanent making it easy to mix and install.

Adawall Manhole Levelling Compound from 2HK – This compound has been specifically manufactured for the resetting of manhole frames, gully grids and other street ironwork. It has been developed in accordance with the recommendations of the Design Manual for Roads and Bridges HD 27/94, “Mortars for bedding ironwork”. Once use the mortar quickly sets and can bear traffic loads after 1 hour and once fully set can hold 90N/mm2.

Bostik Sealoflor Super – This polymer modified self-levelling underlayment that can be used on internal concrete sub-floors and cement/sand screeds as a base for floor coverings. Suitable for internal and external use with underfloor heating. Available in 25kg bags the mortar is rapid curing and sets hard in about 2-4 hours and normally floor coverings can be laid in 16 hours.

Bostik Sealomix Powder – Sealocrete Sealomix powdered mortar plasticiser is an air entraining, spray dried polymer mortar plasticiser. This mortar is manufactured to confirm to EN934-3 standard and is packaged as 250 14g sachets. It improves workability of mortar, increases resistance to continuous freezing and thawing in the dried mortar, helping to prevent cracking and crazing. Ready to use, economical sachets reduce wastage and ensure the exact dosage rate is used for the application.